FLOOR PLAN | Tchinterior

FLOOR PLAN PREPARATION /1-2 weeks from the first measurement/

Visit the site for measurements, discussion of the functional features of the premises, drawing up a list of customer wishes, including functional features,
style solutions, etc.
Discussion of the functional features of the premises, finalizing design options/recommendations and requirements
FIRST FLOOR PLAN VERSION preparation, discussion with the customer
SECOND FLOOR PLAN VERSION preparation for planning with
adjustments, discussion with the customer
drawing up the FINAL FLOOR PLAN with adjustments, signing with the customer

Any extra restructures of the plan will occur extra fees (50 AUD/per hour)

For the online service you send measurements of the room, drawn by hand

How to measure

On the first sheet of paper, draw a rough outline of your room, top view. Try at least approximately proportion. We are an important configuration of the walls and dimensions of the floor.
- Mark the front door, windows and balcony door on the plan, if available.
- Number the walls, starting from the front door.
It will take no more than 1 minute.

On the second sheet of paper draw each wall separately.
- For the selection and placement of large furniture, it is also important to know the location of sockets, switches and wall lights. If this is your case, mark them on your plans.
- If one of the walls has a more complex configuration, it can be drawn on a separate sheet larger.
It will take about 5 minutes.

Measure everything that is needed for our purposes, and postpone the dimensions on each of the drawings. With regard to sockets, switches and wall lights, note not only the distance in each direction but also the height at which they are located. There was a case when the familiar head of the bed had exactly the level of a beautiful expensive sconce. And someone has to cut holes in the cabinet under the switches

If you plan to change the door, then in addition to the height and width of the wall, you need to measure the distance from both corners to the door frame, the width and height of the opening, the width and height of the trim panels.

If you have multi-level ceilings, measure the distance from the floor to each of the levels.

It is more correct to write dimensions in millimeters, especially if accuracy is important. For example, "1500" instead of "1.5" m. But you write as it is more convenient for you.

For this, you should have another 10 minutes, and your measurements are ready